Who power point installation suits in Dandenong
A licensed electrician can add new power points, move existing ones or swap old outlets for double or USB versions. In Dandenong homes this often means rooms that have relied on powerboards for years, a kitchen renovation needing bench outlets, or a new appliance that needs a circuit of its own.
Signs a room has outgrown its outlets
Powerboards plugged into powerboards behind the TV, extension leads across a hallway, or a heater and kettle sharing one outlet all show a room without enough points. Every extra plug adds load to the same outlet, and a cord tucked under a rug or behind a couch can warm up without anyone noticing.
Planning where new points go
Think about how each room is used now and after any renovation. Bedside tables, desks, the TV wall, bench space for appliances and the garage are common spots. Adding a data or TV point at the same time as a power point keeps cabling tidy and avoids opening the same wall twice.
Dedicated circuits for heat pumps and induction cooktops
Big appliances such as an induction cooktop or a heat pump hot water system generally need their own circuit rather than a standard outlet. The switchboard has to have room for that circuit, so mention any large appliance you plan to install when you list the points you want.
Why DIY electrical work is not the answer in Victoria
Energy Safe Victoria requires electrical work to be carried out by a licensed electrician, and adding or moving a power point counts. A homemade outlet swap can leave loose terminals or reversed wiring hidden behind the wall plate, where nobody spots the fault until it overheats or gives someone a shock.
Understanding how pricing per point is worked out
The price depends on more than the number of outlets. Roof or underfloor access, brick or plaster walls, the distance back to the switchboard, whether a new circuit is needed and the outlet type you choose all change the work. Grouping several points into one visit is usually more efficient than adding them one by one.
Next step for adding power points at home
You can request a quote here and have a licensed and insured local contractor follow up on the points you need. Before that, list each room with the number of points and rough positions, note any USB, data or TV outlets, and check whether there is a manhole into the roof space or access under the floor.
Power Point Installation Services We Offer
✓New Power Points
Extra outlets in rooms that currently depend on powerboards or extension leads.
✓Moving Power Points
Shifting outlets to suit a renovated kitchen, a new TV wall or a changed bedroom layout.
✓USB Outlet Upgrades
Replacing standard outlets with combined power and USB points at desks, benches and bedsides.
✓Dedicated Appliance Circuits
A separate circuit for a heavy appliance such as an induction cooktop or heat pump.
How it works
- 1
Count rooms and points
Go room by room and write down how many outlets you want, where they should sit and which ones need USB, data or TV connections.
- 2
Check access and the switchboard
The electrician looks at roof and underfloor access, wall types and whether the switchboard has space for any new circuit.
- 3
Install and test the points
Cable is run to each new location, outlets are fitted and every point is tested before the power goes back on.
- 4
Retire the powerboards
Plug appliances straight into the new outlets and remove the extension leads and stacked powerboards that were carrying the load.